A drastic increase in your water bill can be shocking, especially if your water usage patterns have not recently changed. Finding a leak can be tricky, but it’s important get to the source of the issue as quickly as possible to avoid wasting thousands of gallons of water. Here are a few tips on how to check for water leaks in Mt Laurel NJ.
It’s important to understand how to read your water meter so you can check to make sure the water company hasn’t made an error. Ideally, the reading should be at least as high as the amount on your bill (or slightly higher).
However, if the reading is lower, there is a chance that the water company has made a mistake on your invoice. If this is the case, you need to contact them as soon as possible.
How to Perform a Water Leak Test
One of the best ways to determine whether or not you have an issue is to perform water leak test.
Read the meter right before you go to bed and write down the amount.
Make sure no one in the house uses the water overnight.
Check the meter first thing in the morning and if the amount has gone up … you have a leak.
Finding the leak can be tricky, especially if you haven’t any obvious signs like a dripping faucet. Some of the most common types of leaks include:
- Leaky toilets
- Leaky faucets
- Leaky shower heads
- Leaky pipes under sinks
If you are having difficulty locating the source of your leak, contact Action Plumbing today. Our experts can help you detect and repair the leak to prevent further water loss and costly water bills. We’re available 24 hours a day, 7 days a week, and ready to help you when you need it most.